King 320 Evo

King 320 Evo

King 320 Evo

Welding power source MIG MAG inverter synergic a 3Ph  320A

APPLICATIONS
Medium-Heavy carpentry, Maintenance, Repair, Assembly, Installation, Equipment construction, Machinery construction, Automotive,  Pressure vessels, Agriculture.

MATERIALS
Unalloyed steel, Low-alloy steel, Alloy steel, Stainless steel, Galvanized Steel, Aluminium alloys, Copper Alloys

FUNCTION
Synergic SG2, Al-SI, Al-Mg, CuSi3
Pre gas-Post gas
Start / End current
Slope Up / Down
Double short

FOCUS

  • 15 kg inthernal Spool
  • Job save
  • Display 5.7″

FACTORY CONFIGURATION

  • Power source
  • 4 rolls wire feeder motor
  • Rolls 0.8/1.0
  • Display TFT 6″
  • SD Fimercard
  • Instruction manual
Share
Get a quote
Get a quote

Details

    Data Sheet    
Supply voltage   3x400 V   3x400 V
    MIG-MAG TIG MMA
Output range    15 A - 320 A 5 A - 320 A 15 A - 280 A
Duty Cycle 40% 320 A 320 A (35%) 280 A (35%)
  60% 280 A 240 A 217 A
  100% 220 A 190 A 157 A
Open circuit voltage   70 V 70 V 70 V
Frequency   50 / 60 Hz 50 / 60 Hz 50 / 60 Hz
Mains fuses (delayed action)   12 A 10 A 10 A
Max. connected power   8.2 kW 5.8 kW 7.0 kW
Recommended generator rating   13 kW 9.8 kW 11.8 kW
Cos j   0.78 0.78 0.78
Protection classification   IP 21 s IP 21 s IP 21 s
Insulation class   H H H
Rolls   4 - -
Wire speed   2 ÷ 22 m/min - -
Torch connection   Euro Dinse Dinse
Dinse   50 mm2 50 mm2 50 mm2
Weight   45 Kg 45 Kg 45 Kg
Dimensions (WxLxH)   270X720X630 mm  270X720X630 mm 270X720X630 mm
Wire   0.6 - 1.2 - -
Electrode Ø - - 1.5 - 6.0
Elettrodo Cell. Ø mm - - 1.5 - 5.0
Features        
Hot start/ Arc force/ Anti Sticking   - / - / - - / - / - */ * / *
Synergic - SG2 - AL-SI - AL-MG CuSi3   * - -
TIG torch connection   - * -
Pre gas / Post gas   * / * - / * -
Start / end current   * / * * / * -
Slope up / down   * / * * / * -
Double short   * - -
Job save   * *  *
Kit H2O   * * *
Toolsbox  

*

 

you can use the Tools Box only with trolley C7s and it's an alternative to the water cooling unit (it isn't possible to install both accessories under the welding machine).

    
5T5.320.352 KING 320 SYNERGIC
049.600.055 Cable with earth clamp 25 mm2 - dinse 50 mm2 - 3 m
049.600.056 Cable with earth clamp 35 mm2 - dinse 50 mm2 - 3 m
049.600.057 Cable with earth clamp 50 mm2 - dinse 50 mm2 - 3 m
280.500.004 Gas regulator 2 manometers macro CO2/Argon
421.100.005 Manual remote control - L= 5 m - 7 pin connector
421.101.003 Foot remote control - 5 m - 7 pin connector
580.900.500 SD card LCD serie for MIG/TIG
580.900.550 WPS library
580.690.008 Trolley new C7S
580.690.100 Toolsbox (without cooling unit)
  AIR KIT
043.600.143 Torch F36 - 4 m - 320A@60%
  KIT H2O
580.520.053 Water cooling unit
043.600.144 Torch F51 H2O - 3 m - 450A@100%
043.600.145 Torch F51 H2O - 4 m - 450A@100%
043.600.146 Torch F51 H2O - 5 m - 450A@100%
  ACCESSORY TIG
  ROLLS
422.510.002 Roll 0,8-1,0 D.37 - V groove (steel, stainless steel) 
422.510.003 Roll 1,0-1,2 D.37 - V groove (steel, stainless steel)
422.510.004 Roll 1,2-1,6 D.37 - V groove (steel, stainless steel)
422.510.051 Roll 0,8-1,0 D.37 - U groove (aluminium)
422.510.052 Roll 1,0-1,2 D.37 - U groove (aluminium)
422.510.053 Roll 1,2-1,6 D.37 - U groove (aluminium)
422.510.101 Roll 1,2-1,6 D.37 - knurled groove (flux cored)
422.510.102 Roll 2,4-2,8 D.37 - knurled groove (flux cored)