Engine welders standard 3Ph Air cooling – 400A
APPLICATIONS
Maintenance, installation, building sites, hydraulic, repair, oil&gas.
MATERIALS
Unalloyed steel, Low-alloy steel, Alloy steel, Stainless steeel, Caston iron, Aluminium alloys.
FOCUS
Diesel engine, remote control, power generator.
AVAILABLE
Versions 50/60 Hz
FACTORY CONFIGURATION
| Data Sheet | |||
|---|---|---|---|
| Output range | 50 A - 400 A | ||
| Duty Cycle | 40% | 400 A | |
| 60% | 325 A | ||
| 100% | - A | ||
| Open circuit voltage | 75 V | ||
| Frequency | Hz | 50 Hz | 60 Hz |
| Three fase power | 15 kVA | 18 kVA | |
| Single fase power | 5.6 kVA | 7.2 kVA | |
| Voltage available to the terminals | 230 - 400V | 127 - 220V | |
| Motor | Lombardini | ||
| Max power | 26 Hp | n.a. | |
| Cylinders | 2 | ||
| Displacement | 1248 cc | ||
| Speed | 3.000 rpm | 3.600 rpm | |
| Fuel consumption | L/h | 4 | n.a |
| Tank capacity | L | 60 | |
| Insulation class | H | ||
| Weight | 540 Kg | ||
| Dimensions (WxLxH) | 650x1400x1050 mm | ||
| Electrode | 1.0 - 6.0 |
| 6S7.451.193 | MTD 450 (50 Hz) |
|---|---|
| 6S7.451.393 | MTD 450 (60 Hz) |
| 6S7.552.193 | MTD 550 (50 Hz) |
| 6S7.552.393 | MTD 550 (60 Hz) |
| 489.603.411 | Cables set complete 25 mm2 - dinse 50 mm2 - L=3+2 |
| 489.603.404 | Cables set complete 35 mm2 - dinse 50 mm2 - L=3+2 |
| 489.603.413 | Cables set complete 50 mm2 - dinse 50 mm2 - L=3+2 |
| 421.100.005 | Manual remote control - L= 5 m - 7 pin connector |
| 421.102.001 | Polarity changeover |
| TIG ACCESSORIES | |
| 043.600.238 | Torch TT 26 V - 4 m - dinse 50 mm2 Valve - 240A@60%DC - 170A@60%AC |
| 280.500.002 | Gas regulator 2 manometers micro CO2 |
| 280.500.008 | Gas regulator 1 manometer micro CO2 |