| Data Sheet | ||
|---|---|---|
| Supply voltage | 3x400V | |
| DV Version |
3x230V |
|
| Output range | 25 A - 250 A | |
| Duty Cycle | 35% | 250 A |
| 60% | 190 A | |
| 100% | 130 A | |
| Open circuit voltage | 15.25 ÷ 26.5 VDC | |
| Frequency | 50 / 60 Hz | |
| Mains fuses (delayed action) | 10 A | |
| Max. connected power | 4.8 kW | |
| Recommended generator rating | 8.2 kW | |
| Cos j | 0.9 | |
| Protection classification | IP 21 s | |
| Insulation class | F | |
| Adjustement range | 11 step (7 Step for DV) | |
| Rolls | 2 | |
| Wire speed | 2 ÷ 20 m/min | |
| Torch connection | Euro | |
| Dinse | 25 mm2 | |
| Weight | 67 Kg | |
| Dimensions (WxLxH) | 330x900x820 mm | |
| Wire | Ø | 0.6 - 1.0 |
| Features | ||
| Pre gas/post gas | - | |
| Soft start | * | |
| Burn back | * | |
| Display | - | |
| DV version | * |
Tm 260
Tm 260
Welding power source MIG MAG standard a 3Ph 250A
APPLICATIONS
Building sites, medium-heavy carpentry, blacksmith, agriculture.
MATERIALS
Unalloyed steel, Low-alloy steel, Alloy steel, Stainless steeel, Copper Alloys, Aluminium alloys.
FOCUS
15 kg inthernal Spool.
AVAILABLE
Dual voltage version, 4 rolls.
FACTORY CONFIGURATION
- 2 rolls wire-feeder motor
- Rolls 0.6/0.8
- Carton box
Get a quote
Get a quote
Details
| 6S4.260.352 | TM 260 |
|---|---|
| 6S4.260.362 | TM 260 DV |
| 049.600.060 | Cable with earth clamp 16 mm2 - dinse 25 mm2 - 3 m |
| 049.600.054 | Cable with earth clamp 25 mm2 - dinse 25 mm2 - 3 m |
| 043.600.141 | Torch F25 - 3 m - 200A@60% |
| 043.600.142 | Torch F25 - 4 m - 200A@60% |
| 280.500.004 | Gas regulator 2 manometers macro CO2/Argon |
| 422.500.303 | Roll 0,6-0,8 D.30 - V groove (steel, stainless steel) |
| 422.500.312 | Roll 0,8-1,0 D.30 - V groove (steel, stainless steel) |
| 422.500.304 | Roll 1,0-1,2 D.30 - V groove (steel, stainless steel) |
| 422.500.314 | Roll 1,2-1,6 D.30 - V groove (steel, stainless steel) |
| 422.500.309 | Roll 0,8-1,0 D.30 - U groove (aluminium) |
| 422.500.316 | Roll 1,0-1,2 D.30 - U groove (aluminium) |
| 422.500.310 | Roll 1,2-1,6 D.30 - U groove (aluminium) |
| 422.500.317 | Roll 1,0-1,2 D.30 - Knurled groove (flux cored) |
| 422.500.315 | Roll 1,2-1,6 D.30 - Knurled groove (flux cored) |