اسبكترم للخدمات الهندسية

		Data Sheet
Supply voltage		3x400 V		3x400 V
		MIG-MAG	TIG	MMA
Output range		15 A - 320 A	5 A - 320 A	15 A - 280 A
Duty Cycle	40%	320 A	320 A (35%)	280 A (35%)
	60%	280 A	240 A	217 A
	100%	220 A	190 A	157 A
Open circuit voltage		70 V	70 V	70 V
Frequency		50 / 60 Hz	50 / 60 Hz	50 / 60 Hz
Mains fuses (delayed action)		12 A	10 A	10 A
Max. connected power		8.2 kW	5.8 kW	7.0 kW
Recommended generator rating		13 kW	9.8 kW	11.8 kW
Cos j		0.78	0.78	0.78
Protection classification		IP 21 s	IP 21 s	IP 21 s
Insulation class		H	H	H
Rolls		4	-	-
Wire speed		2 ÷ 22 m/min	-	-
Torch connection		Euro	Dinse	Dinse
Dinse		50 mm2	50 mm2	50 mm2
Weight		45 Kg	45 Kg	45 Kg
Dimensions (WxLxH)		270X720X630 mm	270X720X630 mm	270X720X630 mm
Wire		0.6 - 1.2	-	-
Electrode	Ø	-	-	1.5 - 6.0
Elettrodo Cell.	Ø mm	-	-	1.5 - 5.0
Features
Hot start/ Arc force/ Anti Sticking		- / - / -	- / - / -	/ / *
Synergic - SG2 - AL-SI - AL-MG CuSi3		*	-	-
TIG torch connection		-	*	-
Pre gas / Post gas		* / *	- / *	-
Start / end current		* / *	* / *	-
Slope up / down		* / *	* / *	-
Double short		*	-	-
Job save		*	*	*
Kit H2O		*	*	*
Toolsbox		* you can use the Tools Box only with trolley C7s and it's an alternative to the water cooling unit (it isn't possible to install both accessories under the welding machine).

5T5.320.352	KING 320 SYNERGIC
049.600.055	Cable with earth clamp 25 mm2 - dinse 50 mm2 - 3 m
049.600.056	Cable with earth clamp 35 mm2 - dinse 50 mm2 - 3 m
049.600.057	Cable with earth clamp 50 mm2 - dinse 50 mm2 - 3 m
280.500.004	Gas regulator 2 manometers macro CO2/Argon
421.100.005	Manual remote control - L= 5 m - 7 pin connector
421.101.003	Foot remote control - 5 m - 7 pin connector
580.900.500	SD card LCD serie for MIG/TIG
580.900.550	WPS library
580.690.008	Trolley new C7S
580.690.100	Toolsbox (without cooling unit)
	AIR KIT
043.600.143	Torch F36 - 4 m - 320A@60%
	KIT H2O
580.520.053	Water cooling unit
043.600.144	Torch F51 H2O - 3 m - 450A@100%
043.600.145	Torch F51 H2O - 4 m - 450A@100%
043.600.146	Torch F51 H2O - 5 m - 450A@100%
	ACCESSORY TIG
	ROLLS
422.510.002	Roll 0,8-1,0 D.37 - V groove (steel, stainless steel)
422.510.003	Roll 1,0-1,2 D.37 - V groove (steel, stainless steel)
422.510.004	Roll 1,2-1,6 D.37 - V groove (steel, stainless steel)
422.510.051	Roll 0,8-1,0 D.37 - U groove (aluminium)
422.510.052	Roll 1,0-1,2 D.37 - U groove (aluminium)
422.510.053	Roll 1,2-1,6 D.37 - U groove (aluminium)
422.510.101	Roll 1,2-1,6 D.37 - knurled groove (flux cored)
422.510.102	Roll 2,4-2,8 D.37 - knurled groove (flux cored)